4BIS4801-01-04B000-0-75K0040-0 by Skf Usa Inc With NSN 3110-00-529-9455

Part No. : 4BIS4801-01-04B000-0-75K0040-0	Alternate P/N : 4BIS48010104B000075K00400	Manufacturer : skf usa inc
Item Name: bearing ball rod end	NSN: 3110-00-529-9455 (3110005299455)	CAGE Code: 38443
FSC: 3110 Bearings Antifriction Unmounted

If you require part number 4BIS4801-01-04B000-0-75K0040-0 from Skf Usa Inc which is described as a Bearing Ball Rod End component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 4BIS4801-01-04B000-0-75K0040-0 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110005299455 and was produced under the CAGE Code 38443. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 4BIS4801-01-04B000-0-75K0040-0 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for 4BIS4801-01-04B000-0-75K0040-0

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number 4BIS4801-01-04B000-0-75K0040-0 with NSN 3110-00-529-9455, 3110-00-529-9455

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-529-9455 Item PartTypeName: BEARING,BALL,ROD END	3110	005299455		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
4BIS4801-01-04B000-0-75K0040-0	6	2	3

Characteristics Data of NSN 3110-00-529-9455, 3110005299455

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
AAZE	SHANK DIAMETER	0.4380 INCHES NOMINAL
AAZF	SHANK STYLE	INTERNALLY THREADED W/HEXAGON END
ABHP	OVERALL LENGTH	1.9380 INCHES NOMINAL
ABXV	BORE DIAMETER	0.2500 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	0.9380 INCHES NOMINAL
AGGY	SHANK THREAD LENGTH	0.7500 INCHES NOMINAL
AGVT	OUTER RING WIDTH	0.4380 INCHES NOMINAL
AGVU	INNER RING WIDTH	0.5930 INCHES NOMINAL
AGXH	LENGTH FROM BORE CENTER TO SHANK END	1.4690 INCHES NOMINAL
AGYK	SHIELD QUANTITY	2
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AHAW	SELF-ALIGNMENT LOCATION	INTERNAL
ASDB	WIDTH ACROSS FLATS	0.4375 INCHES NOMINAL
CMLP	THREAD QUANTITY PER INCH	24
CQJX	NOMINAL THREAD SIZE	0.312 INCHES
CTLK	SELF-ALIGNMENT ANGLE	10.00 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	0.0700 IN. DIA HOLE DRILLED THROUGH SHANK 0.3125 IN. FROM BASE OF SHANK AND CHAMFER 0.0350 IN. BY 45 DEG ON BORE CORNERS
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	STEEL BALL
MATT	MATERIAL	STEEL CORROSION RESISTING SHIELD
MATT	MATERIAL	STEEL INNER RING
MATT	MATERIAL	STEEL OUTER RING
MATT	MATERIAL	STEEL SHAFT
SFTT	SURFACE TREATMENT	CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
STYL	STYLE DESIGNATOR	DOUBLE ROW,STAGGERED,BALL
THSD	THREAD SERIES DESIGNATOR	UNF