Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : D9027 | Manufacturer : smith a o water products corp | Item Name: motor direct current |
| NSN: 6105-00-513-9631 (6105005139631) | CAGE Code: 05147 | FSC: 6105 Motors Electrical |
If you require part number D9027 from Smith A O Water Products Corp which is described as a Motor Direct Current component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number D9027 which is listed under the Federal Supply Class 6105 Motors Electrical. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 6105005139631 and was produced under the CAGE Code 05147. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part D9027 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6105-00-513-9631 Item PartTypeName: MOTOR,DIRECT CURRENT | 6105 | 005139631 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 8724474 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 8.500 INCHES |
| AAJU | OVERALL LENGTH | 13.332 INCHES |
| AAJV | OVERALL WIDTH | 10.500 INCHES |
| ABGJ | STEP LENGTH | 0.8750 INCHES NOMINAL SINGLE END |
| ABWV | SHAFT DIAMETER | 1.0000 INCHES NOMINAL SINGLE END |
| AGAV | END ITEM IDENTIFICATION | M110 HOWITZER FAMILY |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED |
| ANTN | SPECIFIC USE | DRIVE UNIT,TURRET ROTATION |
| AXCP | WINDING TYPE | COMPOUND WOUND |
| AXGY | MOUNTING METHOD | FLANGE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE |
| BFLT | TIME INTERVAL | 15.0 MINUTES MAXIMUM ON |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BFMR | KEYWAY CENTER TO SHAFT END DISTANCE | 0.4690 INCHES NOMINAL SINGLE END |
| BFNF | UNDERCUT CENTER TO SHAFT END DISTANCE | 0.1050 INCHES NOMINAL SINGLE END |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| CBBL | FEATURES PROVIDED | ELECTRIC NOISE SUPPRESSOR AND HORIZONTAL MOUNTING POSITION |
| CNMK | WOODRUFF KEY SIZE DESIGNATION | 6 SINGLE END |
| CNXS | POWER RATING | 5.000 HORSEPOWER OUTPUT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 1.020 INCHES FIRST END |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | 8.125 INCHES |
| CWFX | ROTOR SPEED RATING IN RPM | 5000.0 SINGLE NO LOAD |
| CWGL | CURRENT RATING IN AMPS | 202.000 LOW INPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHZ | SHAFT END CHARACTERISTIC | A28 FIRST STYLE SINGLE END AND A11 SECOND STYLE SINGLE END AND A12 THIRD STYLE SINGLE END |
| TEST | TEST DATA DOCUMENT | 19207-8724474 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 1 CONNECTOR,PLUG |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions