Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : HT4027-9D45 | Alternate P/N : HT40279D45 | Manufacturer : sps technologies inc |
| Item Name: screw close tolerance | NSN: 5305-01-507-4373 (5305015074373) | CAGE Code: 80539 |
| FSC: 5305 Screws |
If you require part number HT4027-9D45 from Sps Technologies Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HT4027-9D45 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015074373 and was produced under the CAGE Code 80539. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HT4027-9D45 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-507-4373 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015074373 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST3M557 | 5 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAUR | Grip Diameter | 0.5610 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM |
| ASXK | Hole Quantity | 1 |
| AHYM | Nominal Thread Diameter | 0.5625 INCHES |
| AASK | Head Style | FLAT COUNTERSUNK |
| MRC | Decoded Requirement | Clear Text Reply |
| AGAV | End Item Identification | LANDING GEAR |
| BQDM | Hole Type | DRILLED |
| CMLP | Thread Quantity Per Inch | 18 |
| CRHC | Hole Configuration Style | ROUND |
| AAUB | Hole Diameter | 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM |
| MDCL | Material Document And Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ABQZ | Internal Drive Style | HIGH-TORQUE |
| AAJF | Thread Direction | RIGHT-HAND |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| AASL | Head Diameter | 0.838 INCHES NOMINAL |
| THSD | Thread Series Designator | UNJF |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASA | Thread Length | 0.906 INCHES NOMINAL |
| MATT | Material | NICKEL ALLOY 718 OVERALL |
| AASB | Fastener Length | 3.7035 INCHES MINIMUM AND 3.7335 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
| ANEE | Grip Length | 2.8025 INCHES MINIMUM AND 2.8225 INCHES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions