Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : BACB30WP6-10 | Alternate P/N : BACB30WP610 | Manufacturer : sps technologies inc |
| Item Name: screw close tolerance | NSN: 5305-01-338-3149 (5305013383149) | CAGE Code: 80539 |
If you require part number BACB30WP6-10 from Sps Technologies Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number BACB30WP6-10 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305013383149 and was produced under the CAGE Code 80539. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part BACB30WP6-10 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-338-3149 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013383149 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BACB30WP6-10 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASL | HEAD DIAMETER | 0.691 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP32.0 MICROINCHES THREADS |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.578 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.188 INCHES MINIMUM AND 1.218 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ANEE | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions