HTH054-3-11A by Sps Technologies Inc With NSN 5305-01-266-8397

Part No. : HTH054-3-11A	Alternate P/N : HTH054311A	Manufacturer : sps technologies inc
Item Name: screw close tolerance	NSN: 5305-01-266-8397 (5305012668397)	CAGE Code: 80539

If you require part number HTH054-3-11A from Sps Technologies Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HTH054-3-11A which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305012668397 and was produced under the CAGE Code 80539. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HTH054-3-11A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for HTH054-3-11A

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number HTH054-3-11A with NSN 5305-01-266-8397, 5305-01-266-8397

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-266-8397 Item PartTypeName: SCREW,CLOSE TOLERANCE	5305	012668397	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
ST3M730-31	5	2	3

Characteristics Data of NSN 5305-01-266-8397, 5305012668397

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM
AASB	FASTENER LENGTH	1.011 INCHES MINIMUM AND 1.041 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.3145 INCHES MINIMUM AND 0.3147 INCHES MAXIMUM
ABQZ	INTERNAL DRIVE STYLE	HIGH-TORQUE
AHYM	NOMINAL THREAD DIAMETER	0.190 INCHES
ANEE	GRIP LENGTH	0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	32
CQBC	MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
MATT	MATERIAL	STEEL COMP 8740 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF