Part No. : TX2017V4-10A | Alternate P/N : TX2017V410A | Manufacturer : sps technologies ltd |
Item Name: screw close tolerance | NSN: 5305-01-469-2877 (5305014692877) | CAGE Code: 56878 |
FSC: 5305 Screws |
If you require part number TX2017V4-10A from Sps Technologies Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX2017V4-10A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014692877 and was produced under the CAGE Code 56878. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX2017V4-10A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. TX2017V4-10A
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-469-2877 Item Description: Screw Close Tolerance | 5305 | 014692877 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Tx2017v4-10a | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.425 INCHES NOMINAL |
AASB | FASTENER LENGTH | 1.050 INCHES NOMINAL |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.249 INCHES NOMINAL |
AAVA | POINT DIAMETER | 0.425 INCHES NOMINAL |
ABQJ | POINT STYLE | FLAT |
ABQZ | INTERNAL DRIVE STYLE | TORX |
AGAV | END ITEM IDENTIFICATION | F/A-18E, F/A-18F |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
ANEE | GRIP LENGTH | 0.625 INCHES NOMINAL |
CMLP | THREAD QUANTITY PER INCH | 28 |
CQBC | MINIMUM TENSILE STRENGTH | 3200 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS - PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR). |
FEAT | SPECIAL FEATURES | 95 KSI SHEAR STRENGTH |
MATT | MATERIAL | TITANIUM OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload