Part No. : 537985 | Manufacturer : ssanford tool and design inc | Item Name: screw machine |
NSN: 5305-00-939-0483 (5305009390483) | CAGE Code: 53375 | FSC: 5305 Screws |
If you require part number 537985 from Ssanford Tool And Design Inc which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 537985 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305009390483 and was produced under the CAGE Code 53375. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 537985 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 537985
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-939-0483 Item Description: Screw Machine | 5305 | 009390483 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
537985 | C | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.585 INCHES MINIMUM AND 0.665 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.825 INCHES MINIMUM AND 0.845 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | SLOT |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
CFSG | NONSTANDARD THREAD PITCH DIAMETER | +0.2213/+0.2238 INCHES |
CMLP | THREAD QUANTITY PER INCH | 28 |
CRSQ | COUNTERSINK ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM |
CYAU | SCREW MATERIAL | NICKEL |
CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | PWA90,FSCM 77445 MFR REF SINGLE MATERIAL RESPONSE |
FEAT | SPECIAL FEATURES | 2 FLATS ON HEAD 0.360MIN. AND 0.380 MAX. WIDTH ACROSS FLATS |
THSD | THREAD SERIES DESIGNATOR | UNS |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload