Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 0371L13-100K | Alternate P/N : 0371L13100K | Manufacturer : tanger electronics a |
| Item Name: resistor variable wire wound non | NSN: 5905-00-083-2770 (5905000832770) | CAGE Code: 15584 |
If you require part number 0371L13-100K from Tanger Electronics A which is described as a Resistor Variable Wire Wound Non component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 0371L13-100K which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905000832770 and was produced under the CAGE Code 15584. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 0371L13-100K today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-083-2770 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 000832770 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3057L-J04-104 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.604 INCHES MINIMUM AND 1.679 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.374 INCHES MINIMUM AND 0.388 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.245 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.341 INCHES MINIMUM AND 0.409 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.263 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.245 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.374 INCHES MINIMUM AND 0.388 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 16200.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 6.00 INCH-OUNCES |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 16200.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 04660-92C876-001 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions