Part No. : 33948 | Manufacturer : taylor dunn corporation | Item Name: cylinder assembly hydraulic brak |
NSN: 2530-00-758-0042 (2530007580042) | CAGE Code: 10695 | FSC: 2530 Vehicular Brake Steering Axle Wheel and Track Components |
If you require part number 33948 from Taylor Dunn Corporation which is described as a Cylinder Assembly Hydraulic Brak component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 33948 which is listed under the Federal Supply Class 2530 Vehicular Brake Steering Axle Wheel and Track Components. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2530007580042 and was produced under the CAGE Code 10695. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 33948 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 33948
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
2530-00-758-0042 Item Description: Cylinder Assembly Hydraulic Brak | 2530 | 007580042 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
33948 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAFZ | BODY MATERIAL | ANY ACCEPTABLE |
ABDR | MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
ABKW | OVERALL HEIGHT | 3.833 INCHES NOMINAL |
ABMK | OVERALL WIDTH | 4.235 INCHES MINIMUM AND 4.245 INCHES MAXIMUM |
AFLW | ACTUATION METHOD | DIRECT |
ATEM | EXTENDED LENGTH | 7.375 INCHES NOMINAL |
BMWH | RESERVOIR TYPE | INTEGRAL |
BYXG | STRAIGHT BORE INSIDE DIAMETER | 1.000 INCHES NOMINAL |
CBBL | FEATURES PROVIDED | RUBBER BOOT |
CLML | MOUNTING TYPE AND LOCATION | FLANGE PISTON ROD END |
CLMQ | MOUNTING FACILITY DIAMETER | 0.375 INCHES NOMINAL |
CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 3.405 INCHES MAXIMUM |
CLMS | PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END |
CLMT | PORT STYLE | GASKET SEAL |
CLNB | PORT THREAD CLASS | 2B |
AMQZ | COMPRESSED LENGTH | 6.250 INCHES NOMINAL |
BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 3.395 INCHES MINIMUM |
CLMW | PORT THREAD SERIES DESIGNATOR | UNS |
CLMX | PORT THREAD DIAMETER | 0.438 INCHES NOMINAL |
CLMY | PORT THREAD QUANTITY PER INCH | 24 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload