BACB10AD11E9171B by The Boeing Company With NSN 3110-01-037-0842

Part No. : BACB10AD11E9171B	Manufacturer : the boeing company	Item Name: bearing ball rod end
NSN: 3110-01-037-0842 (3110010370842)	CAGE Code: 81205	FSC: 3110 Bearings Antifriction Unmounted

If you require part number BACB10AD11E9171B from The Boeing Company which is described as a Bearing Ball Rod End component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number BACB10AD11E9171B which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110010370842 and was produced under the CAGE Code 81205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part BACB10AD11E9171B today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for BACB10AD11E9171B

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number BACB10AD11E9171B with NSN 3110-01-037-0842, 3110-01-037-0842

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-037-0842 Item PartTypeName: BEARING,BALL,ROD END	3110	010370842	T	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
HHRE-4-S-10-1	6	9	5

Characteristics Data of NSN 3110-01-037-0842, 3110010370842

MRC	Criteria	Characteristic
AAZE	SHANK DIAMETER	0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
AAZF	SHANK STYLE	SOLID
ABHP	OVERALL LENGTH	2.3440 INCHES NOMINAL
ABXV	BORE DIAMETER	0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM
AGVU	INNER RING WIDTH	0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM
AGXH	LENGTH FROM BORE CENTER TO SHANK END	1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AHAW	SELF-ALIGNMENT LOCATION	INTERNAL
CTLK	SELF-ALIGNMENT ANGLE	10.00 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	FILLED WITH 80 PCT OF SPECIFIED LUBRICANT
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	PLASTIC TETRAFLUOROETHYLENE SEAL
MATT	MATERIAL	STEEL COMP 4130 ROD END BODY
MATT	MATERIAL	STEEL COMP E52100 BALL
MATT	MATERIAL	STEEL COMP E52100 INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING
SFTT	SURFACE TREATMENT	CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
STYL	STYLE DESIGNATOR	DOUBLE ROW,STAGGERED,BALL

Part BACB10AD11E9171B With Different Manufacturers