Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : G13589 | Manufacturer : thermal engineering international usa inc | Item Name: cap filler opening |
| NSN: 2930-00-961-1509 (2930009611509) | CAGE Code: 1MME1 | FSC: 2930 Engine Cooling System Components Nonaircraft |
If you require part number G13589 from Thermal Engineering International Usa Inc which is described as a Cap Filler Opening component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number G13589 which is listed under the Federal Supply Class 2930 Engine Cooling System Components Nonaircraft. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2930009611509 and was produced under the CAGE Code 1MME1. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part G13589 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2930-00-961-1509 Item PartTypeName: CAP,FILLER OPENING | 2930 | 009611509 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| G13589 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABEZ | GRIPPING ACCOMMODATION TYPE | KNURLED |
| ABKV | OUTSIDE DIAMETER | 2.844 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.094 INCHES NOMINAL |
| AGEJ | SYSTEM FOR WHICH DESIGNED | PRESSURIZED |
| AGET | SEALING LENGTH | 0.438 INCHES NOMINAL |
| AGEX | CAM QUANTITY | 2 |
| AGEZ | RETAINING DEVICE TYPE | CHAIN AND WIRE HOOK |
| AJQT | RETAINING DEVICE LENGTH | 6.500 INCHES NOMINAL |
| ALGN | PRESSURE RELIEF METHOD | AUTOMATIC |
| BPHD | MAXIMUM WORKING PRESSURE | 7.000 POUNDS PER SQUARE INCH |
| CQST | FILLER NECK DIAMETER FOR WHICH DESIGNED | 2.500 INCHES NOMINAL |
| MARK | SPECIAL MARKINGS | TIGHTEN REMOVE SLOWLY |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STYL | STYLE DESIGNATOR | INSIDE CAM TYPE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions