VW203PP by Timken Corporation With NSN 3110-01-210-3955

Part No. : VW203PP	Manufacturer : timken corporation	Item Name: bearing ball annular
NSN: 3110-01-210-3955 (3110012103955)	CAGE Code: 21335	FSC: 3110 Bearings Antifriction Unmounted

If you require part number VW203PP from Timken Corporation which is described as a Bearing Ball Annular component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number VW203PP which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110012103955 and was produced under the CAGE Code 21335. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part VW203PP today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for VW203PP

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number VW203PP with NSN 3110-01-210-3955, 3110-01-210-3955

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-210-3955 Item PartTypeName: BEARING,BALL,ANNULAR	3110	012103955	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
MS17108-3	2	2	2

Characteristics Data of NSN 3110-01-210-3955, 3110012103955

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	0.6875 INCHES NOMINAL
ABXV	BORE DIAMETER	0.6693 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	1.5748 INCHES NOMINAL
AGYE	SURFACE FINISH	GROUND
AGYF	RETAINER FABRICATION METHOD	PRESSED
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	RIGID
AGZC	LOAD DIRECTION	RADIAL
AGZD	BORE SHAPE	STRAIGHT
AKVV	INTERNAL CLEARANCE	0.0003 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL
CTFZ	STANDARD TOLERANCE DESIGNATION	ABEC NO.5
FEAT	SPECIAL FEATURES	30.0 TO 50.0 FILLED WITH SPECIFIED LUBRICANT
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	RUBBER SYNTHETIC SEALRUBBER SYNTHETIC SEAL
MATT	MATERIAL	STEEL COMP E51100 BALL
MATT	MATERIAL	STEEL COMP E52100 INNER RINGSTEEL COMP E52100 INNER RING
MATT	MATERIAL	STEEL COMP E52100 OUTER RINGSTEEL COMP E52100 OUTER RING
MATT	MATERIAL	STEEL RETAINERSTEEL RETAINER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE INNER RING66 FED STD SINGLE MATERIAL RESPONSE INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OUTER RING66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
STYL	STYLE DESIGNATOR	NON-LOADING GROOVE,NON-SEPARABLE
ZZZK	SPECIFICATION/STANDARD DATA	96906-MS17108 GOVERNMENT STANDARD