RAK3-4W-S1012K by Timken Corporation With NSN 3130-01-463-7300

Part No. : RAK3-4W-S1012K	Alternate P/N : RAK34WS1012K	Manufacturer : timken corporation
Item Name: bearing unit ball	NSN: 3130-01-463-7300 (3130014637300)	CAGE Code: 21335
FSC: 3130 Bearings Mounted

If you require part number RAK3-4W-S1012K from Timken Corporation which is described as a Bearing Unit Ball component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number RAK3-4W-S1012K which is listed under the Federal Supply Class 3130 Bearings Mounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3130014637300 and was produced under the CAGE Code 21335. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part RAK3-4W-S1012K today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for RAK3-4W-S1012K

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number RAK3-4W-S1012K with NSN 3130-01-463-7300, 3130-01-463-7300

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3130-01-463-7300 Item PartTypeName: BEARING UNIT,BALL	3130	014637300	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
SYH3/4WF	5	9	3

Characteristics Data of NSN 3130-01-463-7300, 3130014637300

MRC	Criteria	Characteristic
ABTD	MOUNTING SLOT WIDTH	0.440 INCHES NOMINAL
ABVG	MOUNTING SLOT LENGTH	0.780 INCHES NOMINAL
ABXV	BORE DIAMETER	0.7500 INCHES NOMINAL
ACYB	BASE THICKNESS	0.470 INCHES NOMINAL
ADFX	CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH	3.780 INCHES NOMINAL
AFWC	HOUSING HEIGHT	2.500 INCHES NOMINAL
AFWE	HOUSING WIDTH	5.000 INCHES NOMINAL
AGKL	LUBRICATION FITTING TYPE	HYDRAULIC
AGNF	BASE LENGTH	1.340 INCHES NOMINAL
AGYX	ROLLING ELEMENT GROOVE QUANTITY	2
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AGZH	INTERNAL FIT-UP DESIGNATION	STANDARD
AHZC	ASSEMBLY OVERALL LENGTH	1.340 INCHES NOMINAL
AKRF	SEAL TYPE	CONTACT
AMCL	BLOCK TYPE	FIXED
ANJS	SHAFT END TYPE	OPEN
ANKF	SEAL LOCATION	BOTH ENDS
ANKK	LOAD CAPABILITY TYPE	RADIAL
ANKP	HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE	1.250 INCHES NOMINAL
CWGR	LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE	45.0 DEGREES NOMINAL
CWGY	ROTATING ELEMENT LOCKING METHOD	STRAIGHT SLEEVE
CWJW	MOUNTING HOLE TYPE	SLOTTED
FEAT	SPECIAL FEATURES	WITH LOCKING COLLAR
LBMA	LUBRICATION MATERIAL	GREASE
MATT	MATERIAL	IRON CAST HOUSING
MATT	MATERIAL	RUBBER SYNTHETIC SEAL
MATT	MATERIAL	STEEL BEARING
STYL	STYLE DESIGNATOR	PILLOW BLOCK, SOLID
ABTD	MOUNTING SLOT WIDTH	0.440 INCHES NOMINAL
ABVG	MOUNTING SLOT LENGTH	0.780 INCHES NOMINAL
ABXV	BORE DIAMETER	0.7500 INCHES NOMINAL
ACYB	BASE THICKNESS	0.470 INCHES NOMINAL
ADFX	CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH	3.780 INCHES NOMINAL
AFWC	HOUSING HEIGHT	2.500 INCHES NOMINAL
AFWE	HOUSING WIDTH	5.000 INCHES NOMINAL
AGKL	LUBRICATION FITTING TYPE	HYDRAULIC
AGNF	BASE LENGTH	1.340 INCHES NOMINAL
AGYX	ROLLING ELEMENT GROOVE QUANTITY	2
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AGZH	INTERNAL FIT-UP DESIGNATION	STANDARD
AHZC	ASSEMBLY OVERALL LENGTH	1.340 INCHES NOMINAL
AKRF	SEAL TYPE	CONTACT
AMCL	BLOCK TYPE	FIXED
ANJS	SHAFT END TYPE	OPEN
ANKF	SEAL LOCATION	BOTH ENDS
ANKK	LOAD CAPABILITY TYPE	RADIAL
ANKP	HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE	1.250 INCHES NOMINAL
CWGR	LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE	45.0 DEGREES NOMINAL
CWGY	ROTATING ELEMENT LOCKING METHOD	STRAIGHT SLEEVE
CWJW	MOUNTING HOLE TYPE	SLOTTED
FEAT	SPECIAL FEATURES	WITH LOCKING COLLAR
LBMA	LUBRICATION MATERIAL	GREASE
MATT	MATERIAL	IRON CAST HOUSING
MATT	MATERIAL	RUBBER SYNTHETIC SEAL
MATT	MATERIAL	STEEL BEARING
STYL	STYLE DESIGNATOR	PILLOW BLOCK, SOLID

Related NSN Componets for RAK3-4W-S1012K

If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.

Upload

We are proud to supply every branch of the United States military

Top NSN Parts

view all

Leading NSN Parts Manufacturer