Part No. : HU40-104 | Alternate P/N : HU40104 | Manufacturer : u s bearings and drives |
Item Name: bearing plain self aligning | NSN: 3120-00-431-9960 (3120004319960) | CAGE Code: 02758 |
FSC: 3120 Bearings Plain Unmounted |
If you require part number HU40-104 from U S Bearings And Drives which is described as a Bearing Plain Self Aligning component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HU40-104 which is listed under the Federal Supply Class 3120 Bearings Plain Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3120004319960 and was produced under the CAGE Code 02758. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HU40-104 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. HU40-104
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3120-00-431-9960 Item Description: Bearing Plain Self Aligning | 3120 | 004319960 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Hu40-104 | 2 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABXV | BORE DIAMETER | 2.4990 INCHES MINIMUM AND 2.5000 INCHES MAXIMUM |
ADZG | LUBRICATION MATERIAL | GREASE, MIL-G-23827 |
AGGF | OUTER MEMBER OUTSIDE DIAMETER | 3.9362 INCHES MINIMUM AND 3.9375 INCHES MAXIMUM |
AGGH | OUTER MEMBER WIDTH | 1.4370 INCHES MINIMUM AND 1.4470 INCHES MAXIMUM |
AGGJ | INNER MEMBER WIDTH | 2.0570 INCHES MINIMUM AND 2.0620 INCHES MAXIMUM |
AGKP | STATIC RADIAL LOAD RATING | 360000 POUNDS |
FEAT | SPECIAL FEATURES | THREE OIL HOLES THROUGH INNER MEMBER AND OUTER MEMBER |
MATT | MATERIAL | STEEL COMP 4130 OUTER RACE MEMBER |
MATT | MATERIAL | STEEL COMP E52100 INNER MEMBER |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER MEMBER |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RACE MEMBER |
STYL | STYLE DESIGNATOR | WITHOUT INSERT OR LINER WITH STAKING GROOVE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload